Creative Development: Mixed Modeling Techniques in 3ds Max 2012 with Todd Daniele
* 10 hrs. 11 min.
* |
* Released on August 1, 2011
* |
* Project Files Included (32 MB)
* Required Software: 3ds Max 2012
In this collection of videos we learn several modeling techniques in 3ds Max 2012.
These videos will delve in such modeling techniques as spline modeling, polygonal modeling, and sub divisional surfaces. Through these techniques we are going to create a highly detailed steam locomotive model. We will also be exploring some of the graphite modeling tools and their functionality while modeling. All the while keeping an emphasis on the importance of scene management in a production environment.
76 videos in this course
Introduction and Project Overview
Introduction and Project Overview
52 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will be introduced to the artist and learn what we can expect to take away from this tutorial.
Basic scene set-up in 3ds Max, Layer Management
Basic scene set-up in 3ds Max, Layer Management
16 min. 21 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to set up a basic scene set-up in 3ds Max.
Modeling of main boiler model
Modeling of main boiler model
15 min. 10 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the main boiler of our model.
Refining the boiler model
Refining the boiler model
9 min. 5 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to refine the boiler model.
Modeling front boiler hatch
Modeling front boiler hatch
12 min. 19 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the front boiler hatch.
Naming and refining front boiler hatch
Naming and refining front boiler hatch
2 min. 23 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to name and refine the front boiler hatch.
Modeling of rear boiler section
Modeling of rear boiler section
6 min. 57 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the rear boiler section.
Further development of rear boiler model
Further development of rear boiler model
10 min. 34 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to further develop the rear boiler model.
Positioning and refining of rear boiler section
Positioning and refining of rear boiler section
7 min. 54 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to position and refine the rear boiler section.
Modeling smoke stack and conforming mesh
Modeling smoke stack and conforming mesh
8 min. 28 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the smoke stack and conforming mesh.
Modeling top portal, conform brush introduction
Modeling top portal, conform brush introduction
8 min. 49 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the top portal using the conform brush.
Modeling second Boiler Portal
Modeling second Boiler Portal
8 min. 21 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the second Boiler Portal.
Modeling of locomotive bell components
Modeling of locomotive bell components
16 min. 18 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the locomotive bell components.
Modeling headlight and brackets
Modeling headlight and brackets
7 min. 56 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the headlight and brackets.
Modeling headlight shade
Modeling headlight shade
6 min. 49 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the headlight shade.
Detach headlight lense, model front license plate
Detach headlight lense, model front license plate
6 min. 16 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to detach the headlight lense and model a front license plate.
Headlight acess door modeling
Headlight acess door modeling
6 min. 6 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to add hatch doors to the side of the headlight.
Poly modeling of front and side lamps
Poly modeling of front and side lamps
9 min. 32 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to poly model the lamps on the front of the train broiler.
Refine and develop lamp models
Refine and develop lamp models
5 min. 23 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to refine and develop lamp models.
Modeling of lamp mounting brackets, creation of selection sets
Modeling of lamp mounting brackets, creation of selection sets
9 min. 17 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the lamp with brackets that attach it to the front of the broiler.
Laying out splines for the locomotive chassis
Laying out splines for the locomotive chassis
3 min. 52 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to lay out splines for the locomotive chassis.
Continued development of the chassis using spline booleans
Continued development of the chassis using spline booleans
7 min. 17 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to continue development of the chassis using spline booleans.
Spline boolean subtraction, refinement of the chassis
Spline boolean subtraction, refinement of the chassis
3 min. 57 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to spline boolean subtraction, refinement of the chassis.
Continued development of the chassis using spline booleans
Continued development of the chassis using spline booleans
6 min. 21 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to continue the development of the chassis using spline booleans.
Modeling of smaller chassis components
Modeling of smaller chassis components
6 min. 58 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the smaller chassis components.
Modeling of the front bumper
Modeling of the front bumper
6 min. 48 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the front bumper.
Modeling chassis cross sections
Modeling chassis cross sections
4 min. 13 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the chassis cross sections.
Modeling of leaf spring assemblies
Modeling of leaf spring assemblies
12 min. 43 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the leaf spring assemblies.
Modeling of all hardware
Modeling of all hardware
5 min. 22 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model all of the hardware.
Poly modeling of pipe clamps
Poly modeling of pipe clamps
6 min. 44 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to poly model the pipe clamps.
Modeling of rivets, layer management
Modeling of rivets, layer management
4 min. 9 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model the rivets.
Placing hardware along model's surface, aligning pivots
Placing hardware along model's surface, aligning pivots
10 min. 4 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to place hardware along the model's surface.
Creation and placement of steam lines
Creation and placement of steam lines
8 min. 55 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to create and place the steam lines.
Placement of clamps along steamline
Placement of clamps along steamline
8 min. 12 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to place the clamps along the steamline.
Modeling/confoming side hatch on boiler and side nameplate
Modeling/confoming side hatch on boiler and side nameplate
12 min. 20 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model and conform the side hatch on the boiler and side nameplate.
Connecting multiple splines to create complex shapes
Connecting multiple splines to create complex shapes
6 min. 13 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to connect multiple splines to create complex shapes.
Modeling and placement of side steps
Modeling and placement of side steps
8 min. 48 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this lesson, we will learn how to model and the placement of the side steps.
Modeling of side tank along boiler
Modeling of side tank along boiler
5 min. 9 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the side tank along the boiler.
Modeling support straps for tank model
Modeling support straps for tank model
8 min. 39 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the support straps for the tank model.
Modeling of additional tank component and additional elements
Modeling of additional tank component and additional elements
12 min. 16 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the additional tank component and additional elements.
Adding hardware to the boiler surface
Adding hardware to the boiler surface
7 min. 50 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to add hardware to the boiler surface.
Modeling of ladders
Modeling of ladders
10 min. 7 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the ladders.
Modeling of main drivetrain component
Modeling of main drivetrain component
11 min. 1 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the main drivetrain component.
Model additional elements for the main drive train component
Model additional elements for the main drive train component
10 min. 29 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model additional elements for the main drive train component.
Modeling of front platform and front bumper cover
Modeling of front platform and front bumper cover
16 min. 5 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the front platform and front bumper cover.
Modeling of connecting tube between boiler and drivetrain placement of hardware
Modeling of connecting tube between boiler and drivetrain placement of hardware
9 min. 28 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the connecting tube between boiler and drivetrain.
Modeling of the locomotive cabin walls
Modeling of the locomotive cabin walls
9 min. 31 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the locomotive cabin walls.
Modeling of floor and roof models for the cabin
Modeling of floor and roof models for the cabin
8 min. 28 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the floor and roof models for the cabin.
Modeling of additional detail elements for the cabin
Modeling of additional detail elements for the cabin
7 min. 33 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the additional detail elements for the cabin.
Poly modeling of the large locomotive wheels
Poly modeling of the large locomotive wheels
11 min. 31 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to poly-model the large locomotive wheels.
Poly modeling of the smaller locomotive wheels
Poly modeling of the smaller locomotive wheels
7 min. 41 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to poly-model the smaller locomotive wheels.
Poly modeling of the brake arm
Poly modeling of the brake arm
9 min. 17 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to poly-model the brake arm.
Modeling of brake shoes
Modeling of brake shoes
13 min. 3 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the brake shoes.
Modeling and placement of axels and pins
Modeling and placement of axels and pins
4 min. 21 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model and the placement of axels and pins.
Modeling and placement of leaf spring connecting hardware
Modeling and placement of leaf spring connecting hardware
9 min. 42 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model and the placement of the leaf spring connecting hardware.
Modeling of drivetrain component
Modeling of drivetrain component
5 min. 42 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the drivetrain component.
Modeling of drivetrain guide
Modeling of drivetrain guide
7 min. 49 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the drivetrain guide.
Modeling of drivetrain linkage
Modeling of drivetrain linkage
13 min. 49 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the drivetrain linkage.
Modeling large linkage element
Modeling large linkage element
4 min. 41 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the large linkage element.
Detailing of large linkage element
Detailing of large linkage element
7 min. 43 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to detail the large linkage element.
Modeling placement of front hatch hardware elements
Modeling placement of front hatch hardware elements
8 min. 37 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model and the placement of the front hatch hardware elements.
Modeling and placement of front hatch hinges
Modeling and placement of front hatch hinges
5 min. 37 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model and the placement of the front hatch hinges.
Modeling of Hinge arms
Modeling of Hinge arms
5 min. 49 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the Hinge arms.
Modeling of front steam pipe, placing of hardware
Modeling of front steam pipe, placing of hardware
7 min. 44 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the front of the steam pipe.
Modeling of boiler straps
Modeling of boiler straps
10 min. 2 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the boiler straps.
Modeling of boiler support trusses
Modeling of boiler support trusses
7 min. 38 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the boiler support trusses.
Cloning and placement of boiler support brackets
Cloning and placement of boiler support brackets
5 min. 34 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to clone and to place the boiler support brackets.
Modeling of main rear chassis component
Modeling of main rear chassis component
3 min. 45 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the main rear chassis component.
Modeling of smaller rear chassis components
Modeling of smaller rear chassis components
10 min. 30 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the smaller rear chassis components.
Modeling of chassis clamp
Modeling of chassis clamp
4 min. 31 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to modeling of chassis clamp.
Modeling of the main cow catcher components
Modeling of the main cow catcher components
6 min. 42 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to modeling of the main cow catcher components.
Adding additonal hardware to the cow catcher
Adding additonal hardware to the cow catcher
2 min. 59 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to add additonal hardware to the cow catcher.
Creating conforming steam lines with the topology/splines Graphite Modeling Tools
Creating conforming steam lines with the topology/splines Graphite Modeling Tools
7 min. 29 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to create conforming steam lines with the topology/splines.
Modeling of pull string and supports
Modeling of pull string and supports
7 min. 4 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the pull string and supports.
Modeling of small cabin components
Modeling of small cabin components
5 min. 55 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will learn how to model the small cabin components.
Recap and additional comments
Recap and additional comments
1 min. 54 sec. | Released on August 1, 2011
Required Software: 3ds Max 2012
Project Files Included (32 MB)
In this video we will recap and add additional comments.
Title Run Time
1. Introduction and Project Overview 52 sec. Details »
2. Basic scene set-up in 3ds Max, Layer Management 16 min. 21 sec. Details »
3. Modeling of main boiler model 15 min. 10 sec. Details »
4. Refining the boiler model 9 min. 5 sec. Details »
5. Modeling front boiler hatch 12 min. 19 sec. Details »
6. Naming and refining front boiler hatch 2 min. 23 sec. Details »
7. Modeling of rear boiler section 6 min. 57 sec. Details »
8. Further development of rear boiler model 10 min. 34 sec. Details »
9. Positioning and refining of rear boiler section 7 min. 54 sec. Details »
10. Modeling smoke stack and conforming mesh 8 min. 28 sec. Details »
11. Modeling top portal, conform brush introduction 8 min. 49 sec. Details »
12. Modeling second Boiler Portal 8 min. 21 sec. Details »
13. Modeling of locomotive bell components 16 min. 18 sec. Details »
14. Modeling headlight and brackets 7 min. 56 sec. Details »
15. Modeling headlight shade 6 min. 49 sec. Details »
16. Detach headlight lense, model front license plate 6 min. 16 sec. Details »
17. Headlight acess door modeling 6 min. 6 sec. Details »
18. Poly modeling of front and side lamps 9 min. 32 sec. Details »
19. Refine and develop lamp models 5 min. 23 sec. Details »
20. Modeling of lamp mounting brackets, creation of selection sets 9 min. 17 sec. Details »
21. Laying out splines for the locomotive chassis 3 min. 52 sec. Details »
22. Continued development of the chassis using spline booleans 7 min. 17 sec. Details »
23. Spline boolean subtraction, refinement of the chassis 3 min. 57 sec. Details »
24. Continued development of the chassis using spline booleans 6 min. 21 sec. Details »
25. Modeling of smaller chassis components 6 min. 58 sec. Details »
26. Modeling of the front bumper 6 min. 48 sec. Details »
27. Modeling chassis cross sections 4 min. 13 sec. Details »
28. Modeling of leaf spring assemblies 12 min. 43 sec. Details »
29. Modeling of all hardware 5 min. 22 sec. Details »
30. Poly modeling of pipe clamps 6 min. 44 sec. Details »
31. Modeling of rivets, layer management 4 min. 9 sec. Details »
32. Placing hardware along model's surface, aligning pivots 10 min. 4 sec. Details »
33. Creation and placement of steam lines 8 min. 55 sec. Details »
34. Placement of clamps along steamline 8 min. 12 sec. Details »
35. Modeling/confoming side hatch on boiler and side nameplate 12 min. 20 sec. Details »
36. Connecting multiple splines to create complex shapes 6 min. 13 sec. Details »
37. Modeling and placement of side steps 8 min. 48 sec. Details »
38. Modeling of side tank along boiler 5 min. 9 sec. Details »
39. Modeling support straps for tank model 8 min. 39 sec. Details »
40. Modeling of additional tank component and additional elements 12 min. 16 sec. Details »
41. Adding hardware to the boiler surface 7 min. 50 sec. Details »
42. Modeling of ladders 10 min. 7 sec. Details »
43. Modeling of main drivetrain component 11 min. 1 sec. Details »
44. Model additional elements for the main drive train component 10 min. 29 sec. Details »
45. Modeling of front platform and front bumper cover 16 min. 5 sec. Details »
46. Modeling of connecting tube between boiler and drivetrain placement of hardware 9 min. 28 sec. Details »
47. Modeling of the locomotive cabin walls 9 min. 31 sec. Details »
48. Modeling of floor and roof models for the cabin 8 min. 28 sec. Details »
49. Modeling of additional detail elements for the cabin 7 min. 33 sec. Details »
50. Poly modeling of the large locomotive wheels 11 min. 31 sec. Details »
51. Poly modeling of the smaller locomotive wheels 7 min. 41 sec. Details »
52. Poly modeling of the brake arm 9 min. 17 sec. Details »
53. Modeling of brake shoes 13 min. 3 sec. Details »
54. Modeling and placement of axels and pins 4 min. 21 sec. Details »
55. Modeling and placement of leaf spring connecting hardware 9 min. 42 sec. Details »
56. Modeling of drivetrain component 5 min. 42 sec. Details »
57. Modeling of drivetrain guide 7 min. 49 sec. Details »
58. Modeling of drivetrain linkage 13 min. 49 sec. Details »
59. Modeling large linkage element 4 min. 41 sec. Details »
60. Detailing of large linkage element 7 min. 43 sec. Details »
61. Modeling placement of front hatch hardware elements 8 min. 37 sec. Details »
62. Modeling and placement of front hatch hinges 5 min. 37 sec. Details »
63. Modeling of Hinge arms 5 min. 49 sec. Details »
64. Modeling of front steam pipe, placing of hardware 7 min. 44 sec. Details »
65. Modeling of boiler straps 10 min. 2 sec. Details »
66. Modeling of boiler support trusses 7 min. 38 sec. Details »
67. Cloning and placement of boiler support brackets 5 min. 34 sec. Details »
68. Modeling of main rear chassis component 3 min. 45 sec. Details »
69. Modeling of smaller rear chassis components 10 min. 30 sec. Details »
70. Modeling of chassis clamp 4 min. 31 sec. Details »
71. Modeling of the main cow catcher components 6 min. 42 sec. Details »
72. Adding additonal hardware to the cow catcher 2 min. 59 sec. Details »
73. Creating conforming steam lines with the topology/splines Graphite Modeling Tools 7 min. 29 sec. Details »
74. Modeling of pull string and supports 7 min. 4 sec. Details »
75. Modeling of small cabin components 5 min. 55 sec. Details »
76. Recap and additional comments 1 min. 54 sec.
كود:
http://www.fileserve.com/file/67SwHSv/DtCDMMTi3dsM2012wTD.part8.rar
http://www.fileserve.com/file/pM3m7WD/DtCDMMTi3dsM2012wTD.part7.rar
http://www.fileserve.com/file/Hhd5GtS/DtCDMMTi3dsM2012wTD.part6.rar
http://www.fileserve.com/file/zUAyzDH/DtCDMMTi3dsM2012wTD.part5.rar
http://www.fileserve.com/file/rZRZDdK/DtCDMMTi3dsM2012wTD.part4.rar
http://www.fileserve.com/file/Pg5c7wK/DtCDMMTi3dsM2012wTD.part3.rar
http://www.fileserve.com/file/VJddMHp/DtCDMMTi3dsM2012wTD.part2.rar
http://www.fileserve.com/file/pEmagkm/DtCDMMTi3dsM2012wTD.part1.rar
للحصول على نسخه يمكن التواصل معى